Fairy Garden DIY: Potted Succulent

Okay kids, I've got another fairy garden DIY for you today. This one is pretty easy (I'm getting all of the easy ones out the way frost before tackling the harder ones). Fairy Garden Succulent Planter, it's way too easy. You know if you have succulents in your yard how quickly they begin to reproduce. I simply found one of the tiniest tiny succulent out in the yard I could. If there are no tiny ones just stip the top off a larger succulent stip the lower leaves and plop it into a container of potting soil. Make sure to keep it constantly moist to encourage rooting of the cutting. 

Materials-

: thimble (or other small container

: succulent or other small plant 

: potting soil 

Directions-

1) find your succulent 

2) place it inside of the container

3) water

Go see see my other fairy garden tutorials:

Fairy Garden DIY: picture frame

Fairy Garden: tour

Read More

The Finished Planter

So here is the finished project! I hope you all like it. I think it turned out pretty good myself. Next year, when its not so cold and rainy I will probably do another coat. however I think it looks pretty hot as it is now! You can see both of them, the natural and the painted one. I have the instructions of how I made them HERE...it is a photo step by step instuctional. Plus it was virtually FREE!

Pallets = FREE

Screws = FREE

Paint (optional) = $15

I should probably mention that the paint that I used is an exterior barn paint that I got at Lowes. I used a barn paint because the wood is really rough and I thought it seems more appropriate. In the spring I will make two more and paint the second one I made this time around. 

But all in all I think they turned out super awesome! Even my Dad said he thought they looked great, and if  you knew my dad, a compliment from him means that he was really impressed!

Read More

Pallets with a Purpose

I have recently had this infatuation with re-purposing pallets. Not because I have millions of them laying around my house. Honestly my parents would kill me if I had one laying around! lol. But because its just neat. Pallets are a super easy resource to come by and they are often times cheap or free; and who can beat free! I was able to swipe a few from my job, but if you can't do that, find a store near by that gets in large shipments and see if you can buy or have the unwanted pallets. Most of the time they are willing to oblige. Make sure to ask before taking any pallets, as that often companies send the used pallets back for a cash deposit, and its stealing if you don't. For this project I am making Planter Boxes for my Earth Boxes. Earth Boxes are not the most beautiful thing to see at your house. They are also unsturdy, and tend to fall over when tomato plants get tall and heavy. All in all I two boxes (which turned out pretty AWESOME!) each taking about 3hrs to make and 1 pallet that I deconstructed.

I drew up a REALLY quick plan of what I wanted the boxes to look like when I was all said and done. The dimensions were_____________

Okay, So here we go. Obviously safety is our #1 goal. So be sure to have a pair of safety goggles on. We have to make sure we are safe since we will be using saws, drills and such. Glass eyeballs are not a good thing to have!

Starting off you will need to deconstruct the pallet of your choice. This can be challenging since the nails they use makes you wonder if these are supposed to be deconstructed. They made them like they weren't supposed to be! WHAT!?! Here I have all the pieces that I will be using. With the 3 really study "legs" of the pallet, cut those into  2 - 31" legs and 2 - 16" legs. as seen in the picture on the right.

With the slats from the top and bottom of the pallet, cut them into 11.5" section. These will be used as the sides of our box.

Following the picture on the left. Place the legs in a rectangle, with the smaller of the legs on the inside and the larger legs on the outside. Next, nail them together. I used 3" wood nails. Sorry I don't have a picture of them. I threw the box away! :( Repeat this two times so as to make a top and bottom "lid" (pictures on right)

Tip to top section of your box onto its side and align the 11.5" planks up against the top. So that they are flush with the outside edge... This part is kinda like a jigsaw puzzle, because you'll need to select the boards that fit best. With mine I didn't need to do any extra cutting to make them fit. Maybe I was lucky... :-) Screw the tops of the boards in with two screws per board.

Now You will need attach the bottom part. The inside of the planks should be 6.5" long; as seen in the 1st picture. You will need to keep measuring this over and over and over again as you screw your boards in, because they will shift. continue screwing 2 screws into each board.

For a majority of the project I was using 2" Phillips Wood screws. I did find some problems with the screws stripping. I believe its because the pallets are made from hard oaks and other hard woods. So if you can find some screws that are meant for hard wood use...DO IT! I was trying to make this for free, and I had these laying around.

Now flip it over and do the exact same this to the rest of the sides of the box. I did the two longer sections first and saved the smaller sections for last. That is up to you. It was a personal preference for me.

Now for the finishing effects. Just to give it a more polished look I screwed some planks onto the top. Mine were 2 inches longer than the box to give it a small overhang....and VIOLA we are done!

So I made two of them and will make two more, since I have four earth boxes. You can see one of the earth boxes in the far one. Now I am going to paint them white to match the house. However I really like them as is. It gives them a really great rustic look, and then  you can still see that they were made from pallets! If you were to leave them as is, make sure to coat them with a wood varnish so that they stay looking fresher longer. No point in making your hard earned work rot! 

Well I hope you all enjoyed this little tutorial, Feel free to leave any questions you might have for me. I think these boxes turned out great and surprisingly didn't take long at all to make. I'll put pictures up of them once they are painted, but it is still too cold to be painting now :(

Read More

My Moss

My dad and I recently redid my room. We repainted the walls, the ceiling, and put new trim in. I will admit, it looks pretty sweet. When I was redoing the room, I thought it would be really neat to have some moss plants in it, to give it that naturalistic rustic feel that I love. My sister had some very beautiful pots that were used as centerpieces for her wedding> I grabbed some of those and made out like a bandit. We have moss in the backyard, that was really attractive looking. My dad had brought it back when he went up to the Michigan house. It really shaggy looking with lots of bright and dark highlights. We also had some standard moss that feels more like velvet. Quickly I grabbed the moss and again made out like a bandit. I wish I had taken picks of the process when I was making it, but alas I did not, so use your imagination.
I added some crushed pop cans to the bottom, because I did not have enough potting mix to fill all three containers. Then I added a couple of inches of potting mix (depending on the height that I was looking for). Lastly, I applied the moss on top and secured it with metal hooks.
FYI; when you remove the moss from your yard (or wherever), you need to take some of the original soil with it. Just like all other plants, it needs it roots, no matter how shallow.

Read More